Share information about reloading the 22 TCM cartridge
User avatar
By Rangemaster1
#13688 I would suggest Redding dies. They have a two die set that will crimp if you want. Loading for a rifle doesn't require a crimp, especially a single shot. You should be able to seat your bullets out a bit farther also. There is no SAAMI spec for the cartridge at this point, so manufacturers are flying by the seat of their pants when mfg the dies. I have a set of Redding dies that size slightly smaller than a factory round. If your dies size larger, have your local friendly gunsmith trim a few thou off the bottom of the sizing die. That will allow the die to sit lower and shorten the headspace. Good luck.